67
- Memory Upgrade Module
Checking the Memory Capacity
Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to
check that your notebook has recognized the change.
Removing a Memory Upgrade Module
1
Perform steps 1 through 5 of Installing a Memory
Upgrade Module.
2
Pull the clips sideways away from each side of the
memory upgrade module at the same time.
3
While holding the clips out, remove the module
from the slot by lifting it up and pulling towards
the rear of your LIFEBOOK notebook. (Figure 39)
4
Store the memory upgrade module in a static
guarded sleeve.
5
Replace the cover by following step 8 of Installing
a Memory Upgrade Module.
Figure 39. Removing a Memory Upgrade Module
A
FTER
INSTALLING
YOUR
ADDED
MEMORY
MODULE
,
YOU
MUST
RESET
THE
POWER
PLAN
PARAMETERS
IN
ORDER
FOR
THE
S
AVE
-
TO
-D
ISK
MODE
TO
OPERATE
PROPERLY
ON
YOUR
LIFEBOOK
NOTEBOOK
.
S
EE
“H
IBERNATION
(S
AVE
-
TO
-D
ISK
) F
EATURE
”
ON
PAGE
41.
Memory Clip
Memory Clip
