Fujitsu LifeBook Q2010 User Manual Download

Page: 49 / 120

U s e r - I n s t a l l a b l e F e a t u r e s

3. Place the media into the tray, label side up, with the

hole in the center of the disc. Snap the disc onto the
raised circle in the center of the tray.

4. Gently push the holder tray back in until you hear a

click.

(Figure 4-16)

REMOVING MEDIA

1. Push and release the eject button on the front of the

optical drive. This will stop the drive and the holder
tray will come out of the LifeBook notebook a short
distance.

2. Gently pull the tray out until the disc can easily be

removed from the tray.

3. Carefully remove the media disc from the holder

tray.

4. Gently push the holder tray back in until you hear a

click.

EMERGENCY TRAY RELEASE

In the event the media tray will not open due to a loss of
power, insert a thin object such as a straightened-out
paper clip into the small emergency release hole near the
eject button

(Figure 4-17)

. The tray will open a short

distance.

USING THE MEDIA PLAYER SOFTWARE

Starting a DVD Movie

1. Insert the DVD movie into your optical drive. If the

CD AutoRun feature activates, skip Step 2.

2. The first time you insert a movie into the DVD/CD-

RW tray, you will be prompted to select what you
want the system to do when discs are inserted (e.g.,
start automatically or wait for a prompt). Until you
make a selection, you will receive the same prompt
whenever you insert a disc.

3. Click

to close the About DVD Player

Performance dialog box and the movie will begin.

Opening the Media Player Control Panel

With most DVD-ROMs, you have the option of altering
how the movie should play and what you wish to view.
You can do this by using the media player control panel
and the mouse or touchpad.

1. Right-click on the movie screen to open a drop-

down menu for options.

2. Select

View,

then

Player

for all the controls avail-

able. This will open the control panel into the
bottom of the screen.

Using the Media Player Control Panel

The media player software allows you to watch the
movie much like a VCR player. You have the option to
pause, rewind, fast-forward and stop the movie at any
point.

1. To

Pause

the movie, click the on-screen

button.

2. To

Rewind

the movie, click the

button to rewind

to a specific portion of the movie, or the

button

to return to the opening screen.

3. To

Fast-forward

the movie, click the

button to

forward to a specific portion of the movie, or the

button to jump to the ending credits.

4. To

Stop

the movie, click the

button.

Exiting the Media Player

1. Click the

located in the upper right corner of the

title bar. This will open a media player dialog box.

2. Click Yes to stop and exit the movie, or No to close

the media player dialog box and return to the
movie.

USING DOLBY

™

HEADPHONE

The Dolby Headphone utility lets you enjoy multi-
channel sound sources, such as DVD movies, with real-
istic virtual surround sound using

conventional

stereo

headphones. The Dolby Headphone is a utility that is
available in the PowerDVD application.

Dolby Headphone is a signal processing system that
enables your stereo headphones to realistically emulate
the sound of a multi-speaker playback system.

If you disabled the Auto Play function, you
will have to start the drive from your
desktop, since your LifeBook notebook will
not automatically recognize that media has
been loaded.

Depending upon its configuration, your
system may not have the media player
software pre-installed. If it is not installed,
reference the documentation that
accompanies the media application.

■

Media discs which do not have the
Dolby Surround 5:1 symbol will not
support Dolby Headphone.

■

After making changes to the Dolby
Headphone feature and clicking OK,
wait at least ten seconds before making
another change in order to allow the
system to stabilize.

Q2010.book Page 41 Wednesday, May 24, 2006 1:36 PM