Removing and installing components during servicing
Attaching the cover
2
1
3
►
Place the cover in the correct location (1).
►
Slide the cover in the direction of the arrow (2).
►
Tighten the screw (3).
Finishing component removal
After you have removed or changed the system components as required, please
prepare your device for operation again as follows:
►
Install the battery again, see
"Installing a battery", Page 49
.
►
Turn the notebook the right way up again and place it on a
fl
at surface.
►
Reconnect the cables that were previously disconnected.
88
Fujitsu