Appendix
Configuring the Wireless LAN
The optional WLAN device can be con
fi
gured to establish wireless network connectivity
using the software that is built into Windows. Support for most industry standard
security solutions is contained in this software.
Pre-de
fi
ned parameters will be required for this procedure. Please consult with
your network administrator for these parameters:
Configuring the WLAN Using Windows
The WLAN device can be con
fi
gured to establish wireless network connectivity using
the software that is built into Windows Vista. Support for most industry standard
security solutions is contained in this software.
Pre-de
fi
ned parameters are required for this procedure. Consult your network
administrator for these parameters:
1. From the
Modern Start
screen, press
Windows
+
X
, then select
Control Panel
from the menu.
2. If the
Control Panel
is not in
Classic View
, select
Classic View
from the left panel.
Double-click the
Network and Sharing Center
icon.
3. Select
Setup a new connection or network
.
4. Depending upon what type of connection you would like to make, make a selection. For
an infrastructure network, select
Manually connect to a wireless network
.
5. Enter the required information. It may be necessary to consult with your network
administrator for some of the information.
6. In the event you require assistance, go to the
Network and Sharing Center
window (
Control
Panel > Network and Sharing Center
), and type in relevant keywords in the
Search
box.
Connection to the network
After you have con
fi
gured your computer, you can connect to an active network
by performing the following steps:
1. Click on the
WLAN
icon in the system tray.
2. Select
Connect to a network
.
3. Select a network from the list that appears, and click the
Connect
button.
Fujitsu
113
