Connecting external devices
Connecting an external monitor to the dock
An analog monitor is connected to the analog external monitor port (VGA) and a digital monitor to
the Display Port on the optional dock. The display output is limited to a maximum of two monitors
at the same time (see
, the section on "Toggling the display output").
Monitor
VGAsocket
Monitorport
Monitorport
Analog external monitor port (VGA) (on the
optional dock)
Digital Display Port (on the optional dock)
►
Switch off the notebook and the external monitor.
►
Plug the data cable of the external monitor into the monitor port.
►
First switch on the external monitor and then the notebook.
You can also switch back and forth between the external monitor and the LCD
screen of the notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
Fujitsu
53