5-4
M3099EX/EH OEM Manual
PRINT
HEAD
NOT SET
PRINT
HEAD
ALARM
Scanner actions
Action to recover
LCD display
Table 5.2 lists the scanner and operator actions for equipment errors.
Table 5.2 Device and operator actions for equipment errors
LCD display
Scanner actions
Action to recover
- The Check lamp lights and an
error message is displayed on
the LCD display.
- The mechanism system is
stopped.
- The Check lamp lights and an
error message is displayed on
the LCD display.
- The mechanism system is
stopped.
- Check if the
lamp or heater is
attached
correctly.
Replace lamp
according to the
replacement
method.
- If turning the
power on again
does not recover
the scanner,
contact the
maintenance
personal.
HOPPER
ALARM
TRANS-
PORT
ALARM
Table 5.1 Device and operator actions for temporary errors (continued)
Device and
Operator Actions
for Equipment
Errors
- Print head is not set.
- “Temporary Error” is returned
to the host computer and an
error message is displayed on
the LCD display.
- Print head is not set correctly
or does not work well.
- “Temporary Error” is
returned to the host compu-
ter and an error message is
displayed on the LCD
display.
- Press “STOP” to reset
the error and set the
print head again.
- Press “STOP” to reset
the error and set the
print head again.
- If the error message is
displayed on the LCD
display again, change
the print head.
Summary of Contents for M3099EH
