PREFACE
Thank you for purchasing the QFP-100P (0.65 mm pitch) *
1
header board (Model number :
MB2146-251) for the F
2
MC *
2
-8FX family.
MB2146-251 is a header board used to connect the MCU board (Model number : MB2146-301,
MB2146-303) which mounted F
2
MC-8FX family evaluation MCU to a user system.
This manual explains the handling of the MB2146-251 for the F
2
MC-8FX family. Before using
MB2146-251, be sure to read this manual.
Consult the Sales representatives or the Support representatives of Fujitsu Limited for mass-pro-
duced MCUs and evaluation MCUs which correspond on MB2146-251.
*1 : The lead pitch of package (FPT-100P-M06) is 0.65 mm and the body size is 14 mm
×
20 mm.
*2 : F
2
MC is the abbreviation used for FUJITSU Flexible Microcontroller.
■
Caution of the products described in this document
The following precautions apply to the product described in this manual.
CAUTION
The wrong use of a device will give an injury and may cause malfunction on cus-
tomers system.
Cuts
This product has parts with sharp points that are exposed.
Do not touch edge of the product with your bare hands.
Damage
When connect the header board to the user system, correctly position the index
mark (
▲
) on the NQPACK mounted on the user system with the 1 pin direction(1)
on the header board, otherwise the MCU board and user system might be dam-
aged.
Damage
When mounting a mass production MCU, correctly position pin 1, otherwise the
mass production MCU and user system might be damaged.
i
Summary of Contents for MB2146-251
Page 16: ......
