13
1.10 Options
1.10 Options
The options listed in Table 1.10-1 "Options" are available for the emulator. Purchase
the options separately as required.
■
Options
The emulator unit cannot be used independently. Table 1.10-1 "Options" lists options for the
emulator. As required, purchase options to build an emulator system suitable for the evaluation
MCU used.
Table 1.10-1 Options
Name
Model number
Evaluation MCU (*1)
MB91xxx, MB91Vxxx
DSU-FR cable (*2)
MB2198-10
Adapter board (*3)
MB2197-xxx, MB2198-xxx
Header board (*3)
MB2197-xxx, MB2198-xxx
RS-232C cable (*4), (*5)
-
USB cable (*4), (*6)
-
LAN cable (*4)
-
BNC cable (*7)
-
*1: The model name depends on the evaluation MCU used. For more information, contact the
Fujitsu Sales Dept. or Support Dept.
*2: A DSU-FR cable connects the user system to the emulator.
Several types of this cable may be released in the future. Select and purchase a DSU-FR
cable that is compatible with both the emulator and the user system.
For information on selecting a suitable DSU-FR cable, contact the Fujitsu Sales Dept. or
Support Dept.
Explanations involving a DSU-FR cable in this manual are referring to the MB2198-10.
*3: The adapter board and header board are an interface board that connects the user system
to the emulator unit. Purchase an adapter board and header board that are compatible with
the evaluation MCU used. Contact the Fujitsu Sales Dept. or Support Dept. for information
on selecting a suitable adapter board.
For information on how to handle and use an adapter board and header board, and for
related safety precautions, see the respective manuals.
*4: Use an RS-232C, USB, or LAN cable for the communication interface. Prepare a cable
that is compatible with both the emulator and the host machine used.
*5: Prepare an RS-232C cable by selecting a cross (interlink) type cable.
Figure 1.10-1 "Interlink Cable Wiring" shows interlink cable wiring.
*6: Prepare a USB cable with a maximum length of 2 meters.
*7: A BNC cable is required only if the TRIG or EMUL terminal in the emulator is used. In a
BNC cable is required, prepare one with an impedance of 50 ohms and a maximum length
of 2 meters.
Prepare a BNC cable that is compatible with both the emulator and the emulator to the
device connected.
Summary of Contents for MB2147-01
