50
APPENDIX B User System Specifications
APPENDIX B User System Specifications
This section covers the recommended models, circuit configuration, design
precautions, and wiring specifications for an emulator interface connector
implemented on the user system.
For the flat cable environment, Fujitsu recommends selecting a combination of
connectors along with appropriate housing.
■
Model Numbers of Recommended Connectors
Table B-1 Model Numbers of Recommended Connectors
Attached cable
Model number
Remarks
FPC cable
FH10A-30S-1SH (manufactured by Hirose Electric
Co., Ltd.)
Includes a latch
Flat cable
FAP-2001-120*(*1)-0BS (manufactured by Yamaichi
Electronics Co., Ltd.)
FAP-20-08#*(*2) (manufactured by Yamaichi
Electronics Co., Ltd.)
FAP-20-04#*(*1) (manufactured by Yamaichi
Electronics Co., Ltd.)
Includes housing and a short
latch
Includes housing but no latch
No housing included (beware of
insertion mistakes)
*1:The asterisk (*) represents each of the following terminal forms:
- 1: Right angle/wrapping
- 2: Right angle/solder dip
- 3: Straight/wrapping
- 4: Straight/solder dip
*2:The asterisk (*) represents each of the following terminal forms:
- 1: Right angle/wrapping
- 2: Right angle/solder dip
- 4: Straight/solder dip
See the data sheet of the respective manufacturer according to information such as connector type and
dimensions.
Summary of Contents for MB2147-01
