i
PREFACE
Thank you for purchasing the DSU-FR*
1
emulator F
2
MC*
2
-16FX expansion trace board (model number:
MB2198-590-E)*
3
.
This product is used to connect a Fujitsu F
2
MC-16FX family microcontroller MB96V300 (BGA-416P)
to a DSU-FR emulator (model number: MB2198-01)*
4
and DSU-FR emulator F
2
MC-16FX BGA-416P
adapter (model number: MB2198-500)*
5
.
This document describes how to handle the DSU-FR emulator F
2
MC-16FX expansion trace board.
Be sure to read this document before using the product.
For details on the mass production MCUs and evaluation MCUs supported by this product, consult with
sales or support representative.
*1 : FR, the abbreviation of FUJITSU RISC controller, is a line of products of FUJITSU Limited.
*2 : F
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
*3 : Referred to as the trace board in this manual.
*4 : Referred to as the emulator in this manual.
*5 : Referred to as the adapter in this manual.
■
Safe use of this Product
This manual contains important information regarding how to use this product safely. Be sure to read this
manual before using the adapter, and to follow the directions given in this manual in order to use the
product correctly.
In particular, thoroughly read the "Safety Precautions" at the start of this manual and perform a full safety
check before using this product.
After reading the manual, keep it handy for future reference.
■
Warranties and Liability
The specifications of the adapter are subject to change without notice.
Note that Fujitsu shall accept no responsibility for any consequences arising either directly or indirectly
from the use of this product.
■
Product Operating Environment
Use the product at an operating temperature of between 5
°
C and 35
°
C and at an operating humidity of
between 20% to 80%. Use the product in an environment that is free of condensation and avoid high tem-
perature or humidity.
This product consists of a printed circuit board unit without casing with all electronic components ex-
posed.
Accordingly, do not place other objects on top of the circuit board and do not allow the metal parts of the
unit to come into contact with people or materials that may include static electricity. Similarly, keep any
objects that are flammable, likely to cause a short circuit, or cause any other such problem well away
from the unit when the power to the unit is turned on.
Use the product as horizontal as possible and avoid operating it at a place exposed to strong vibration,
dust, or explosive gas.
If the unit is used in an environment that does not satisfy the above guidelines, there is a risk of unex-
pected damage to property or injury to the user or other people in the vicinity.
You should also keep the packaging materials used for shipping the product. These are useful if the prod-
uct needs to be re-shipped again, for example, if it becomes faulty and needs to be repaired.
■
Related Manuals
Refer to the following manuals in conjunction with this manual.
•
DSU-FR EMULATOR MB2198-01 HARDWARE MANUAL
•
DSU-FR EMULATOR BGA-416P ADAPTER MB2198-500 OPERATION MANUAL
•
DSU-FR EMULATOR QFP-100P HEADER TYPE3 MB2198-501 OPERATION MANUAL
