508
CHAPTER 24 EXAMPLES OF MB90F481B/MB90F482B/MB90F488B/MB90F489B SERIAL PROGRAMMING
■
Oscillation clock frequency and serial clock input frequency
The serial clock frequencies that can be used for input to the MB90F481B, MB90F482B,
MB90F488B, and MB90F489B can be calculated from the following formulas.
Use the flash microcontroller programmer settings to set the serial clock input frequency for the
required oscillation clock frequency.
Serial clock frequency to be input = 0.125 x oscillation clock frequency
Table 24.1-2 shows a serial clock frequency that can be input.
■
System configuration of flash microcontroller programmer
(Yokogawa Digital Computer Corporation)
Table 24.1-3 shows the system configuration of the flash microcontroller programmer.
Table 24.1-2 Example of serial clock frequency that can be input
Oscillation
clock
frequency
Maximum serial clock
frequency that can be
input to microcontroller
Maximum serial clock
frequency that can be set for
AF220/AF210/AF120/AF110
Maximum serial clock
frequency that can be
set for AF200
8 MHz
1MHz
850kHz
500kHz
16 MHz
2MHz
1.25MHz
500kHz
Table 24.1-3 System configuration of the flash microcontroller programmer
Type
Function
Main
body
AF220/AC4P
Model with built-in Ethernet interface
/100 V to 220 V power adapter
AF210/AC4P
Standard model
/100 V to 220 V power adapter
AF120/AC4P
Model with built-in single key Ethernet interface
/100 V to 220 V power adapter
AF110/AC4P
Single key model
/100 V to 220 V power adapter
AZ221
Programmer dedicated RS232C cable for PC/AT
AZ210
Standard target probe (a) length: 1 m
FF201 Fujitsu
F
2
MC-16LX flash microcontroller control module
AZ290 Remote
controller
/P2
2M bytes PC Card (Option) FLASH memory capacity of up to 128 K bytes
supported
/P4
4M bytes PC Card (Option) FLASH memory capacity of up to 512 K bytes
supported
Inquiries: Yokogawa Digital Computer Corporation
Telephone number: (81)-42-333-6224
Summary of Contents for MB90480 Series
