English
E-17
SATELLITE TUNER
• Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)
• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P-
TE1010E is installed.)
• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
To component video output
To audio output
To audio input
To component
video input
To SCART output
To SCART input
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
An example of the underside of the display
(with the P-TE1010E installed in the P42VHA10)
To component video output
To audio output
To S-video output
To video output
To audio input
To component
video input
To S-video input
To video input
E-P42VHA10E-OV(14̲18)
03.1.16, 11:50
Page 17
Adobe PageMaker 6.5J/PPC
