Notes about the KVM function
Notes about the KVM function
Your monitor has a KVM function. This involves the two USB ports designated as "Upstream"
being switched over in response to the selected input signal.
Input signal
USB-Upstream
HDMI1/HDMI2
USB-B
Display port
USB-B
USB-C
USB-C
This enables you to switch or ‘swap’ between any peripherals connected to the monitor
and the integrated network port between two computers.
►
For more convenient switching between two computers, press and hold down the key
until the progress bar for the
Swap Inputs
function (switch between inputs) has reached 100%.
The monitor switches between USB-C and the other input signal, i.e. the one used most recently.
Swap Inputs
If data carriers are connected to the monitor, it is advisable before changing the input
signal to disable the
Remove hardware safely
function to prevent the loss of data.
The
Swap Inputs
function is only enabled if a computer is connected to both
of the USB ports designated as "Upstream".
48
Fujitsu
