background image

E-30

OTHER ADJUSTMENTS (FEATURES MENU) (Continued)

OTHER SETTINGS

DPMS

for other then RGB1

You can use this option to select the amount of time before the DPMS function starts.

DPMS (which stands for “display power management signaling”) allows the display to maintain an

automatic power saving function.

This function causes on-screen information to disappear until the next input operation, if the power

is ON and the display has not received any signals for the predetermined period of time.  When
DPMS is active, the power indicator lamp turns orange.

(1) Select DPMS and press 

.

DPMS screen appears.

(2) Press 

 or 

 to select Time.

(3) Each time you press   or  , one of the available choices appears in the following sequence:

Off:

Disables DPMS

Number: Approximate time before DPMS starts.  (Unit: minutes)

* The power indicator lamp turns orange while the DPMS is ON.

* The power turns ON automatically when the display receives a signal.

(4) Can specify background colour.

Press 

 or 

 to select background colour.

Each time you press   or  , one of the available choices appears in the following sequence:

Black 

 

White

Black: Mutes images in Black background.

White: Mutes images in White background.

* Switches approx. 20 seconds after the display stops receiving signals.

 (5) Press 

 to store.

• Selecting input terminals (Audio Input)

You can use this option to select the available terminals to receive the audio from input equipment.

(1) Select “Audio Input” and press 

.

The “Audio Input” selection screen will appear.

(2) Press 

 or 

 to select video input terminal.

(3) Select a related audio input terminal.

Each time you press   or  , one of the available choices appears in the following sequence:

No audio: No audio in the corresponding mode.

Audio 1-3: Selects Audio 1 through 3 for receiving audio in the corresponding mode.

* Repeat steps (2) and (3) for each piece of input equipment.

(4) Press 

 to store.

*Audio Input menu will not be displayed when "No Audio"is selected.

DPMS selection screen

“Audio Input” selection screen

 E-Plasma-wide2 (30-33)

03.10.3, 0:19 PM

Page 30

Adobe PageMaker 6.5J/PPC

Summary of Contents for P42VHA30W, P42HHA30W















































Reviews: