Table A.4 Messages Reported by Machine Administration
No
Message
Meaning
Workaround
1
fjgi_device_check: fjgi_hw_deinit failed !
An error occurred during
initialization of the adapter.
The version number of the driver may not
support this hardware. Please apply any
applicable patches described in the
Installation Guide. If the problem
persists, there is a possibility of hardware
abnormalities. Please replace the adapter.
2
fjgi_device_check: fjgi_hw_init failed !
An error occurred during
initialization of the adapter.
There is a possibility of hardware
abnormalities. Please replace the adapter.
3
pci_config_setup_failed
The driver could not allocate
sufficient PCI configuration
space.
There is a possibility of a resource
shortage or hardware abnormalities.
Please check the memory usage and
adapter installation status.
4
Autonegotiation_failed
The Auto-Negotiation of
1000BASE-SX failed.
Check the transmission mode and the
adapter hardware.
- 61 -
Summary of Contents for PCI Gigabit Ethernet
