PCNA EP OCe14102 2x 10Gb
Page 5
1. Introduction
Major Features
Support for 10 GbE SFP+ optical or Direct-Attach Copper (DAC) connectors
SFF-8431 Enhanced Small Form Factor Pluggable Module SFP+ compliant
External volatile memory: 2Gb/4Gb DDR3 SDRAM technology
On-board flash memory: The flash is 128Mbit with a SPI interface. The flash
contains the vital product data (VPD) and Boot BIOS images. You can update
the flash with Emulex utilities.
Interoperates with existing FC SAN infrastructures – switches, arrays, SRM
tools (including Emulex utilities), SAN practices, and so forth
Unified Ethernet-to-FC SAN connectivity provided by an FCoE switch
Comprehensive array of NIC, iSCSI and FCoE operating system drivers,
including support for Windows, Linux, and VMware
Parts and construction compliant to the European Union Directive of Restriction
of Hazardous Substances (RoHS), and similar regulatory requirements for other
countries.
Protocol-specific capabilities
-
NIC capabilities include:
-
NDIS 5.2, 6.0, and 6.2-compliant Ethernet functionality
-
IPv4/IPv6 TCP, UDP checksum offload
-
IPv4/IPv6 Receive Side Scaling (RSS)
-
IPv4/IPv6 Large Receive Offload (LRO)
-
IPv4/IPv6 Large Send Offload (LSO)
-
Programmable MAC addresses
-
Up to 128 MAC/VLAN addresses
-
Support for hash-based multicast MAC address filters
-
Support for hash-based broadcast frame filters per port
-
VLAN insertion and extraction
-
Jumbo packet support up to 9200 bytes
-
iSCSI capabilities include:
-
Full iSCSI protocol offload
-
Header, data digest (CRC) and PDU
-
Direct data placement of SCSI data
-
Up to 4K outstanding commands (iSCSI CNA only mode)
-
Up to 512 offloaded iSCSI connections (iSCSI CNA only)
-
iSCSI initiator and concurrent initiator/target modes
-
Support for multipath I/O
-
T10 PI support for end-to-end data integrity (for target mode drivers)
-
FCoE capabilities include:
-
Hardware offloads of Ethernet TCP/IP and concurrent iSCSI and FCoE
-
ANSI T11 FC-BB-5 support
-
Programmable World Wide Name (WWN)