Fujitsu PFU Rack2-Filer User Manual Download

Page: 392 / 463

Chapter 11 Rack2-Filer Backup & Restore Tool

392 |

Rack2-Filer User's Guide

Item

Description

Target

LibRoot folder name set in Rack2-Filer.

LibRoot Path

LibRoot folder path set in Rack2-Filer.

Backup To

Target path to save backup data

Last Backup

The last backup date

Result

The last backup result shows in either of the following:
OK (Succeeded), NG (Failed), or -- (Not complied with)

Target LibRoot

Select the target LibRoot folder to be backed up.
Select "WorkArea" to backup the WorkArea.

Backup Targets
[Select] button

Used to open the Backup Items Selection window.
This cannot be selected if "WorkArea" is selected for the
LibRoot folder to be backed up.

Backup To

Shows the folder path to be stored backed-up data.
Click [Browse] and select the backup destination.

[New Schema] button

Used to add new backup settings.

[Apply Changes] button

Used to edit existing backup settings.

[Delete Schema] button

Used to delete backup schema according to the contents
in the Confirm Deletion window.

[Run Selected Backup
Schema Now] button

Used to back up according to the selected backup
schema in the setting list.

[OK] button

Used to save settings and close the window.

[Cancel] button

Used to close the window without saving.

[Apply] button

Used to apply and save settings.

Summary of Contents for PFU Rack2-Filer
















































































































































































































































































































































































































































































Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands

Fujitsu PFU Rack2-Filer, User Manual

Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands