background image

Before using the display, read this manual carefully so that you know how to use the display correctly.

Refer to this manual whenever questions or problems about operation arise.  Be sure to read and observe the

safety precautions.

Keep this manual where the user can see it easily.

* Installation and removal require special expertise.  Consult your product dealer for details.

Contents

• Safety Precautions ······················································ E-2–E-3
• Accessories ········································································ E-4
• Handy Tips ·········································································· E-4
• Installation ·········································································· E-5
• Part Names and Functions ········································· E-6–E-7
• Connecting the Display to External Equipment ·············· E-8
• Options ··············································································· E-9
• Specification ····································································· E-10
• Cleaning and Maintenance ············································· E-11

Page

English

USER’S MANUAL

42” WIDE PLASMA DISPLAY

P42HHS30E

E-MHD00833(hyo1).p65

03.10.17, 11:41 AM

Page 2

Adobe PageMaker 6.5J/PPC

Summary of Contents for Plasmavision W P42HHS30E












Reviews: