SVmco User Guidel
136
That is why if the smartd service is used, the smartd service must be
stopped before hot maintenance of a hard disk and the smartd service
must be restarted with the latest hard disk status after hot maintenance.
The procedure is as follows.
1.
Before hot maintenance of a hard disk, stop the smartd service.
The running condition of the smartd service can be checked from the
output result of the following operation.
Example: Output results when the smartd service is running
# /sbin/service smartd status
smartd (pid XXXXX) is running...
XXXXX: This part varies with the environment.
If the smartd service has been started, stop it by using the following
operation.
# /sbin/service smartd stop
2.
Execute hot maintenance of a hard disk, and complete it.
3.
Start the smartd service.
After stopping the smartd service in step 1, you will need to restart it
after the hot maintenance of a hard disk is completed.
Start the smartd service by using the following operation.
