SVmco User Guidel
14
Notes
o
Before changing the settings, confirm that the settings in the
ifcfg file have the values that were automatically set during SVmco
installation. If they do not have the automatically set values, SVmco
may not have been installed. Always change the settings after
SVmco installation.
o
Do not change any line, including comment lines, except those
with the items that must be changed (BROADCAST, IPADDR, and
NETMASK). Otherwise, PSA-MMB communication may be disabled,
making SVmco functions unavailable. Moreover, a SVmco update
may overwrite the automatically set values.
2.
Restart the network service to activate the network interface.
Syntax
/sbin/service network restart
3.
Set the PSA-to-MMB communication LAN IP addresses in the SVmco
configuration file.
File storage location : /etc/fujitsu/SVmco/usr/tommbipsetup.conf
Setting values: Enter the IP addresses set in Step 1.
<Setting example>
[NETWORK]
TOMMBIP=172.30.0.4 <IP address set by Step1>
