SVmco User Guide
45
2.
Select [SVMCONIF] from the displayed list. Then, select [Properties]
from the right-click menu.
Notes
o
If there is no connection named [SVMCONIF], SVmco has
probably not been installed. Always change the settings after SVmco
installation.
o
Do not change the connection name [SVMCONIF]. Otherwise,
the settings can be overwritten by the automatically set values in a
SVmco update.
3.
Select [Internet Protocol (TCP/IP)]. Then, click the [Properties] button.
>> The [Internet Protocol (TCP/IP) Properties] dialog box appears.
4.
Set the IP address and subnet mask.
5.
Set the PSA-to-MMB communication LAN IP addresses in the SVmco
configuration file.
File storage location : [SVmco installation
folder]\etc\fujitsu\SVmco\usr\ tommbipsetup.conf
Setting values: Enter the IP addresses set in Step 4.
<Setting example>
[NETWORK]
