MMB Web-UI (Web User Interface) Operations
1.3 [Partition] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E
170
CA92344-0539-04
(1) Menu Operation
[Partition] - [Partition Configuration] - [Add Unit] button
(2) Window Operations
1.
Select the SB or IOU to be incorporated in the partition, and then click the [Apply] button.
A confirmation dialog box appears.
2.
Click [OK] button.
The SB or IOU will be incorporated.
3.
Click the [Apply] or [Cancel] button.
Return to [Partition Configuration] window.
[Message]
This section describes the messages to be displayed on this window.
Message Number
Message
E_00045
Free node doesn’t exist.
E_00110
Failed to add the SB, IOU or Extended Partitioning to the partition.
E_00112
Unable to add the specified SB#%aa to the partition due to CPU mismatch between
SBs.
E_00424
Unable to add the specified SB to the partition due to CPU composition abnormal.
E_00425
Unable to add the specified SB to the partition due to DIMM composition abnormal.
E_00490
Unable to add the specified SB to the partition due to DIMM does not satisfy
requirements of Mode.
W_00505
Unable to set configuration because the power on/off is processing. Please execute it
after a while again.
E_00519
Unable to add the specified SB to the partition due to SB composition abnormal.
W_00593
Unable to add the specified SB to the partition due to Dynamic Reconfiguration Mode.
For details on the messages displayed on the window, see
PRIMEQUEST 2000 Series Message Reference
(CA92344-0540).
When multiple errors are detected, multiple errors are displayed in the dialog box.