manualshive.com logo in svg

Fujitsu PRIMEQUEST 2000 Series, Tool Reference

The Fujitsu PRIMEQUEST 2000 Series Configuration Manual is a valuable resource for users of this advanced server system. This comprehensive manual allows users to optimize system settings and ensure smooth operations. It is available as a free download from 88.208.23.73:8080, providing users with easy access to essential information to maximize the performance of their Fujitsu PRIMEQUEST 2000 Series.

Share
Download
background image

MMB CLI (Command Line Interface) Operations 
2.2 Setting Commands 

 

383 

 

CA92344-0539-04 

(4)  Message 
The following table lists the messages which are displayed in this CLI. 
 
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540). 
 

The setting will become effective the next time the partition power off/on is performed. 
The specified partition number is invalid. 
The specified parameter is invalid. 
Unable to register the specified Partition#%d as Mode enable because the CPU mismatch between SBs. 
Unable to register the specified Partition#%d as Mode enable because the DIMM does not satisfy 
requirements of Mode. 
Unable to register the specified Partition#%d as Mode enable because the unsupported CPU configuration. 
Unable to register the specified Partition#%d as Mode enable because of abnormal CPU composition. 
Unable to register the specified Partition#%d as Mode enable because of abnormal DIMM composition. 
Unable to register the specified Partition#%s as Mode enable because of abnormal SB composition. 
Unable to execute this command on a standby MMB. 
Failed to execute %s command. 
Failed to execute set partition command. 
Unable to change the mode while the partition is running. 
Please try to change the mode after the partition is shutdown. 
Unable to execute this command because you have not authority to operate this partition. 

 
 

2.2.28 set partition memory_operation_mode

 

It sets the Memory Operation Mode of the specified partition. 
 
By default normal (Mode invalid) is set. 
 

performance  : sets the Performance Mode 
normal 

: sets the Normal Mode 

partial_mirror : sets the Partial Mode 
full_mirror 

: sets the Full Mode 

spare 

: sets the Spare Mode 

 
For the partition which is already powered ON, when the settings are performed by this command, following 
message is displayed and settings cannot be performed. 
 

“

Unable to change the mode while the partition is running. 

Please try to change the mode after the partition is shutdown.” 
 
When the partition is configured of or above, and when Reserved SB is set, also, when the settings other 
than the Memory Operation Mode satisfying the DIMM configuration requirement of SB is set as Reserved 
SB, following message is displayed and setting cannot be possible. 
 

“

The SB with DIMM that does not satisfy requirements of Mode is  

registered as a Reserved SB. 
If you register this partition as a Mode, 
Mode will be disabled when switching to Reserved SB. 
Are you sure to continue?[Y/N]

” 

 
For the partition which is already powered OFF, when the settings are changed by this command, power 
OFF/ON is not required. The value which is set is reflected instantly instead of displaying the above-
mentioned message.  
 
Moreover, also when the values which are the same as the current values are set, power off/on is not 
required and the above-mentioned message is not displayed. 
 
When the specified partition is an Extended Partitioning, an error message is displayed, and the specified 
partition cannot be operated. 
 
 

Summary of Contents for PRIMEQUEST 2000 Series































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PRIMEQUEST 2000 Series

Accessory Power ReVIVE series Instruction Manual preview
ReVIVE series
Brand: Accessory Power Pages: 4
I-GO WALL MAX User Manual preview
WALL MAX
Brand: I-GO Pages: 2
Xircom POCKET ETHERNET ADAPTER III User Manual preview
POCKET ETHERNET ADAPTER III
Brand: Xircom Pages: 93
HomeMatic HM-LC-Dim1L-Pl-2 Operating Manual preview
HM-LC-Dim1L-Pl-2
Brand: HomeMatic Pages: 15
Aretas ASMX01WA Instruction Manual preview
ASMX01WA
Brand: Aretas Pages: 4
Firmtech FB200AS Quick Manual preview
FB200AS
Brand: Firmtech Pages: 68
Allied Telesis AT-MWS0091 Quick Install Manual preview
AT-MWS0091
Brand: Allied Telesis Pages: 2
Solisto Solisto.Home User Manual preview
Solisto.Home
Brand: Solisto Pages: 12
Micro Connect HDMDPP1 User Manual preview
HDMDPP1
Brand: Micro Connect Pages: 5
YOKOGAWA ZR22P User Manual preview
ZR22P
Brand: YOKOGAWA Pages: 34
IBM Remote Supervisor Adapter User Manual preview
Remote Supervisor Adapter
Brand: IBM Pages: 124
Tanita OP-102-RU Setup Manual preview
OP-102-RU
Brand: Tanita Pages: 16
Keyspan USA-19H Manual preview
USA-19H
Brand: Keyspan Pages: 40
Lava SimulCharge nLTS Quick Installation Manual preview
SimulCharge nLTS
Brand: Lava Pages: 8
Alpine Blackbird Docking Adapter PMD-DOK2 Installation & Owner'S Manual preview
Blackbird Docking Adapter PMD-DOK2
Brand: Alpine Pages: 2
Logitec LAN-W150N/U2M User Manual preview
LAN-W150N/U2M
Brand: Logitec Pages: 34
Linksys RTP300 - Broadband Router With 2 Phone Ports Quick Installation Manual preview
RTP300 - Broadband Router With 2 Phone Ports
Brand: Linksys Pages: 2
L3 Systems KeyAT Manual preview
KeyAT
Brand: L3 Systems Pages: 42

Brands by name

Popular brands

Load more brands