FUJITSU Server PRIMEQUEST 3400E
System Configuration Guide
16. Restrictions
The followin functions are restricted as of November 2018.
No.
1
Infiniband HCA(56Gbps) [MC-0JHC71/MCX0JHC71/MC-0JHC81/MCX0JHC81] and Infiniband
HCA(100Gbps) [MC-0JHC91/MCX0JHC91/MC-0JHCA1/MCX0JHCA1] can not be mixed.
2
Max. number of Dual Channel LAN Card (10G BASE) (X710-DA2) [MC-0JXEK2/MCX0JXEK1] per partition
is 8.
3
released
When installing VMware ESXi 6.5, install a network device other than the Intel X550 LAN device
[MC-0JXEJ2/MCX0JXEJ1/Onboard LAN].
This restriction was released on VMware ESXi 6.5u2.
4
released
Dynamic Reconfiguration of System Board is not supported.
5
released
Infiniband HCA(100Gbps) [MC-0JHC91/MCX0JHC91/MC-0JHCA1/MCX0JHCA1] can not be used.
6
released
SAS RAID controller card (4GB Cache) (EP540i) [MC-0JSR71/MCX0JSR71] can not be used.
7
released
TPM function is not supported on Windows Server.
8
100Gbps Omni Path card [MC-0JOP11/MCX0JOP11] can not be used.
9
released
Dual Channel LAN Card (10G BASE-T) (X550-T2) [MC-0JXEJ2/MCX0JXEJ1] can not be used in the PCI Box.
10
released
Dual Channel LAN Card (10G BASE) (X710-DA2) [MC-0JXEK2/MCX0JXEK1] can not be used in the PCI Box.
11
When adding an IOU with PCI Box by Dynamic Reconfiguration, do not install the following PCI cards
in the PCI Box. These cards may not be recognized after OS reboot.
MC*0JFCF* : Single Port Fibre Channel Card (16Gbps) Emulex
MC*0JFCG* : Dual Port Fibre Channel Card (16Gbps) Emulex
MC*0JFCM* : Single Port Fibre Channel Card (32Gbps) Emulex
MC*0JFCN* : Dual Port Fibre Channel Card (32Gbps) Emulex
12
released
HTML5 can not be used in Video Redirection function.
13
Can not boot with OCE14102-NX/UX[MC-0JXEN1/M-0JXEN2/MC0JXEN1] and old firmware(before 10.2) in
legacy mode.
14
released
Emulex Fiber Channel Card [MC-0JFC**] can not be used in OL7.4/OVM3.4.
This restricion was released with firmware 11.2.210.13 or later.
15
released
SAS RAID controller card (4GB/8GB Cache) (EP540i/EP580i) [MC*0JSR71/MC*0JSR81] can not be used in
OL7.4/OVM3.4.
16
Emulex and Mellanox PCI card can not be used in VMware ESXi6.7.
17
Dual Channel LAN Card (25G BASE) (XXV710-DA2) [MC-0JXEH1/MCX0JXEH1] cannot be used in Legacy
mode.
18
Dual Channel LAN Card (25G BASE) (QL41212) [MC-0JFEA1/MCX0JFEA1] and Single Channel LAN Card
(100G BASE) (QL45611) [MC-0JFEB1/MCX0JFEB1] can not be mixed in Windows.
19
Dual Channel LAN Card (25G BASE) (MCX4121A-ACAT) [MC-0JFE11/MCX0JFE11] cannot be mixed with
Mellanox Infiniband HCA card (56Gbps, 100Gbps) [MC-0JHC*] or Omni Path card (100Gbps) [MC-0JOP11] in
a partition.
20
Dual Channel LAN Card (40G BASE) (MCX416A-BCAT) [MC-0JFE41/MCX0JFE41] cannot be mixed with
Mellanox Infiniband HCA card (56Gbps, 100Gbps) [MC-0JHC*] or Omni Path card (100Gbps) [MC-0JOP11] in
a partition.
21
Single Channel LAN Card (100G BASE) (MCX415A-CCAT) [MC-0JFE71/MCX0JFE71] cannot be mixed with
Mellanox Infiniband HCA card (56Gbps, 100Gbps) [MC-0JHC*] or Omni Path card (100Gbps) [MC-0JOP11] in
a partition.
22
When mixed with X710-DAx and XXV710-DAx, please update the LAN card firmware (NVM) to latest (6.01 or
later).
37 of 38
