A26361-K863-Z102-8-7619
Rev. 8.0
57
Updating BX300 Components
Switch Blade firmware
5.4.3
Updating the Switch Blade firmware
I
Before updating the firmware, you need to assign an IP address to each
Switch Blade
.
Proceed as follows:
Ê
Switch on the blade server system and start the management console
(Telnet) of the management blade.
Console Menu
page_root
--------------------------------------------------------------------------------
(1) Management Agent
(2) Emergency Management Port
(3) Console Redirection
(4) TFTP update
(5) Logout
(6) Reboot Management Blade
(7) System Information Dump
Enter Selection: 3
Ê
Select
Console Redirection
.
Console Redirection Table
page_3.
--------------------------------------------------------------------------------
(1) Console Redirect Server Blade
(2) Console Redirect Switch Blade
(3) Set Return Hotkey , Ctrl+(a character) : 0
Enter selection or type (0) to quit: 2
Ê
From the Console Redirection Table choose
Console Redirect Switch Blade
.
Console Redirection Switch Blade
page_3_2.
--------------------------------------------------------------------------------
(1) Console Redirect Switch Blade_1
(2) Console Redirect Switch Blade_2
(3) Console Redirect Switch Blade_3
(4) Console Redirect Switch Blade_4
Enter selection or type (0) to quit: 1
