A26361-K863-Z102-8-7619
Rev. 8.0
71
8
The Server Blade
The server can be equipped with up to 20 CPU server blades (Pentium III
®
(mono or dual) or Pentium
®
M). Mixed configuration are permitted. Twenty slots
(1-20 numbered from left to right) are available for this purpose on the front side
of the server system, behind the front panel (figure 31).
Figure 31: PRIMERGY BX300 Blade Server System with removed front panel
8.1
Server Blade Pentium
®
III
The server blade Pentium
®
III includes (figure 33):
–
Mono or dual processor support
–
Two DIMM sockets for maximum 2 GB PC133 SDRAMs
–
Two integrated Ethernet controllers
–
On-board IDE-RAID controller
–
Two locations for 2.5-inch IDE hard disk drives
–
On-board graphics controller ATI Rage XL 4MB
–
Special connector for 2xUSB and VGA port (special cable required! (see
figure 38 on page 78)
