82
Rev. 8.0
A26361-K863-Z102-8-7619
Exchanging/Adding Procedures
The Server Blade
Figure 43: Installing an SDRAM module (a = green touch points)
Ê
Press the two levers (a) in the direction of the arrows (1) to disengage the
locking mechanism of the SDRAM socket.
Ê
Position the SDRAM module so that the two notches on the bottom edge
align with the socket on the server blade (2).
Ê
Insert the SDRAM module into the socket and press firmly in the direction of
the arrow (3) until it is seated correctly.
Ê
Secure the SDRAM module by carefully pushing the two levers (a) into the
locking position (4).
