20
Operating Manual
CX122
S1
Safety instructions
PRIMERGY CX122 S1
●
The On/Off button does not isolate the device from the mains power
supply. To disconnect it completely from the CX1000 power
distribution unit, loosen the two knurled screws on the server front
and slide the server out of the rack about 10 centimeters.
●
Proper operation of the system (in accordance with IEC 60950-1/
EN 60950-1) is only ensured if the casing is completely assembled
and the slot brackets of the installation slots have been fitted (electric
shock, cooling, fire protection, interference suppression).
●
When removing a PRIMERGY CX122 S1 server from the system
unit, always install a dummy cover in the empty installation bay.
●
Only install system expansions that satisfy the requirements and
rules governing safety and electromagnetic compatibility and those
relating to telecommunication terminals. If you install other
expansions, they may damage the system or violate the safety
regulations. Information on which system expansions are approved
for installation can be obtained from our customer service center or
your sales outlet.
●
The components marked with a warning notice (e.g. lightning symbol)
may only be opened, removed or exchanged by authorized, qualified
personnel.
●
A defective PRIMERGY CX122 S1 server node is maintained by
Fujitsu service technicians. The warranty is void if the server is
damaged during installation or replacement of system expansions.
Summary of Contents for PRIMERGY CX122 S1
