14
U41271-J-Z156-2-76
Notes on Installing into the Rack
Important Notes
2.4
Notes on Installing into the Rack
●
For safety reasons, at least two people are required to install the rack model
because of its weight and size.
●
When connecting and disconnecting cables, observe the relevant notes in
the chapter “Important notes” in the documentation for the corresponding
rack. The documentation is supplied with the corresponding rack.
●
Ensure that the anti-tilt bracket is correctly mounted when you set up the
rack.
●
For safety reasons, only one unit should be withdrawn from the rack at any
one time.
●
If several units are withdrawn at the same time from the rack there is a
danger that the rack will tilt forward.
●
The power connection for the rack must be installed by an authorized
technician (electrician).
2.5
Transporting the Server
V
CAUTION!
Transport the server only in its original packaging or in a packaging which
protects it from knocks and jolts. Do not unpack the server until you are
done transporting.
If you need to lift or transport the server, ask other people to help you.
