U41243-J-Z156-1-76
115
System expansions
RemoteView storage medium
8.8.1
Configuring the RemoteView storage medium
So that
RemoteView
can be started automatically later, enter the parameters of
the storage medium in the BIOS setup. To do this, proceed as follows:
Ê
Restart the server.
Ê
Press function key F2 when the message
Press <F2> to enter SETUP
appears
on the screen. You will find notes on this procedure in section “BIOS Setup”
on page 47.
Ê
Select in the Main menu of the BIOS setup the Primary Master and the
Primary Slave submenu (see section 5.3.3 on page 51).
For both, Primary Master and for Primary Slave the value for
Type
has to be
set to
auto
as default
I
With this default settings the IDE ChipDISK is not „visible“ as drive in
the standard administration environment (e. g. windows explorer).
Ê
Start
RemoteView
via the
ServerView
restart option
Boot Diagnostic System
.
Ê
End
RemoteView
with menu item
Boot Original OS
.
The server then boots the standard operating system. You can find how to
operate
RemoteView
in the manual for
RemoteView
.
I
Should the RemoteView software not yet be installed on the IDE storage
medium, then install the software as described in the manual for
RemoteView
.
