237
PRIMERGY RX100 S3 User’s Guide
9
O
p
eration
a
nd
Mainten
ance
■
Display
●
The display does not power on
Check to see whether the power cable of the display is properly connected to the outlet. For details, refer
to the "Start Guide" or the manual of the display.
●
The screen display is distorted when the Linux system is shut down
Although the screen display may be distorted when shutting down the system in the Linux environment,
the system is shut down normally. This has no harmful effect on the system.
●
Nothing is displayed on the screen
• Check to see whether the display cable is connected properly.
If it is not connected, turn the server off and then connect the cable. For the connection location, refer
to the "Start Guide".
• Check that the brightness volume and contrast volume of the display are adjusted correctly. If they
need to be adjusted, perform the necessary adjustments.
For details, refer to the manual of the display.
• There may be an error in the system area of the memory. Contact an office listed in the "Contact
Information" of "Start Guide".
●
Typing using the keyboard does not display any characters, or the mouse
cursor does not move
Check to see whether the keyboard and mouse are connected properly. If they are not connected, turn the
server off and then connect the cables to the server.
For the connection location, refer to the "Start Guide".
●
The screen shakes
If a device that produces a strong magnetic field such as a television or speaker is near the display, place
them further away from the display.
The display may also shake if a nearby cell-phone receives a call. Do not use a cell-phone near the
display.
●
The screen display is distorted
If a 3D program is executed on Windows Server 2003, Windows Server 2003 x64 or Windows 2000
Server, the screen display may become distorted or the 3D program may terminate abnormally. If this
occurs, set Color quality in screen properties to anything other than True Color (32 bits).
