192
Chapter 7 Installing Internal Options
7.5 Installing an Internal CD-ROM
Drive Unit
This section explains the procedure for installing a CD-ROM drive (optional).
Unless otherwise noted, description of the CD-ROM includes DVD-ROM.
7.5.1 Installable CD-ROM Drive Units
The following CD-ROM drive units can be installed on this server.
Package
Before installing the internal CD-ROM drive unit, refer to "Appendix B.2 Internal CD-ROM Drive Unit
pg.276) and, as for DVD-ROM drive unit, refer to "Appendix B.3 Internal DVD-ROM
pg.276) to check the contents of the package.
For internal DVD-ROM drive unit, refer to the manual supplied with the internal DVD-ROM drive unit to
check the contents of the package.
• Before installation or removal, turn off the server and all peripheral devices.
Also unplug all power cables from the server. Failure to do so may cause
electric shock (
"1.4.3 Turning Off the Server" (pg.33)).
• When installing a CD-ROM drive, hold it by the side.
Applying force to the top may cause failures.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
table: Installable CD-ROM Drive Units
Product name
Model
Remarks
CD-ROM ATAPI
PG-CD320B
IDE (ATAPI)
DVD-ROM ATAPI
PG-DVA102D
IDE (ATAPI)
