RX1330 M3
Upgrade and Maintenance Manual
341
Appendix
16.4 Minimum startup configuration
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
The minimum startup configuration consists of the following components and
cables:
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
Take the system down to its minimum startup configuration.
Ê
"Connecting the power cord" on page 64
Ê
Connect a keyboard, mouse and display to the server.
Ê
"Switching on the server" on page 66
Field Replaceable Units (FRU)
Component
Notes
System board
no TPM, UFM or expansion cards installed
CPU with heat sink
1 memory module
installed in DIMM slot 1A
Front panel module
PSU
Table 6: Minimum startup configuration - components
Cable
Notes
Front panel cable
Power cable
Table 7: Minimum startup configuration - cables
Summary of Contents for PRIMERGY RX1330 M3
