68
Operating manual
RX200
S4
Switching the server on and off
Startup and operation
Switching the server OFF
Power-on indicator (item 6 in
figure 12 on page 57
) lights green.
Ê
Shut down the operating system properly.
The server is automatically switched off. The power-on indicator lights up
orange.
I
If the operating system does not switch the server off automatically,
press the On/Off button for at least four seconds and/or send a corre-
sponding control signal.
Other on/off options
In addition to the On/Off button, the server can be switched ON and OFF in the
following ways:
–
Specified switch on time / switch off time
The server is switched ON or OFF at a time specified in the ServerView
program
–
Ring indicator
The server is switched on by an internal or external modem.
–
Wake On LAN (WOL)
The server is switched on by a command via the LAN (Magic Package).
–
After power failure
The server automatically reboots following a power failure (depending of the
settings in the BIOS).