RX200 S6
Options Guide
41
Processors
Ê
Close the processor holder (2).
Ê
Lock the processor in the socket by returning the spring clip to its original
position (3).
Ê
Apply a small amount of thermal paste to the upper side of the new
processor.
Ê
Ensure a thin and even distribution of the thermal paste.
Ê
Place the heat sink on the processor (see
figure 10 on page 38
).
Ê
Fasten the heat sink by tightening the four screws in a crossover pattern.
Ê
Reinstall the air duct as described in the
chapter "Completion" on page 73
.
Ê
Close the server, connect it to the power outlet, and switch it on as described
in the
chapter "Completion" on page 73
.
Summary of Contents for PRIMERGY RX200 S6
