RX200 S6
Options Guide
51
HDD modules
Removing the existing HDD backplane (6x HDD)
Ê
Remove all HDD modules from the housing.
Figure 21: Removing the HDD backplane
Ê
Disconnect all cables from the HDD backplane (see circle).
Ê
Lift the HDD backplane over the metal bars (see arrows) and then remove it.
Installing the new HDD backplane (8x HDD)
Ê
Place the new HDD backplane (8x HDD) on the metal bars (see arrows in
figure 21
) and press the HDD backplane down carefully.
Ê
Connect all the required cables to the HDD backplane (see
figure "Cabling
for up to 8 HDD modules with optional RAID controller" on page 80
).
Summary of Contents for PRIMERGY RX200 S6
