RX200 S6
Operating Manual
65
Starting up and operation
Hard disk drive indicators
Figure 13: Indicators on the 2.5-inch HDD module
1
HDD BUSY (green)
–
Lights up: HDD in active phase
–
Does not light: HDD inactive (drive inactive)
2
HDD FAULT (orange)
(in conjunction with a RAID controller)
–
Does not light: no HDD error
–
Lights up: HDD Faulty or Rebuild Stopped (drive defective, needs
replacing, a rebuild process was stopped or the HDD module is not
correctly inserted)
–
Slow flashing: HDD Rebuild (the data is being restored after changing
a drive)
–
Fast flashing: HDD Identify
–
Four fast blinks/pause: HDD Predicted Fault
–
Two fast flashes/pause: HDD Hot Spare (Hot spare drive active. The
corresponding drive has failed).
햲 햳
Summary of Contents for PRIMERGY RX200 S6
