RX2530 M4
Upgrade and Maintenance Manual
143
Hard disk drive (HDD) / solid state drive (SSD)
7.3.4.1 Preliminary steps
Ê
"Locating the defective server" on page 47
Ê
"Locating the defective component" on page 48
7.3.4.2 Removing the defective 3.5-inch HDD module
Ê
Remove the HDD module, see section
"Removing a 3.5-inch HDD module"
Ê
If applicable, remove the HDD from the installation frame, see section
"Handling HDDs or SSDs without installation frame" on page 131
.
7.3.4.3 Installing the new 3.5-inch HDD module
Ê
If applicable, install the HDD in the installation frame, see section
HDDs or SSDs without installation frame" on page 131
Ê
Install the HDD module, see section
"Installing a 3.5-inch HDD module" on
7.3.4.4 Concluding steps
Ê
If the HDD is configured using a RAID controller with a RAID level higher
than "0", the rebuild will start automatically, see section
Summary of Contents for PRIMERGY RX2530 M4
