RX2540 M2
Upgrade and Maintenance Manual
141
Power supply unit (PSU)
Ê
Hold the CMA stopper, the crossbar and the CMA including cables in the one
hand.
Ê
Remove the PSU (see figure
) and install the new PSU carefully.
I
Note for PSU1: Remove the PSU1 carefully while lifting PSU1 and
bringing PSU1 to the right, in order to avoid interference
Ê
Mount the complete assembly (CMA stopper, the crossbar and the CMA)
again into the rail.
6.4.3
Removing the defective hot-plug PSU
Ê
Remove the defective PSU as described in
6.4.4
Installing the new hot-plug PSU
Ê
Install the new hot-plug PSU as described in section
6.4.5
Concluding steps
Ê
"Connecting the power cord" on page 79
Ê
Only when replacing a PSU in a non-redundant configuration:
Ê
Summary of Contents for PRIMERGY RX2540 M2
