RX2540 M2
Upgrade and Maintenance Manual
233
Hard disk drives (HDD) and solid state drives (SSD)
7.6.2.4
Installing the rear backplane
Ê
Install the rear backplane as described in section
.
7.6.2.5
Connecting cables to the rear backplane
Ê
"Connecting cables to the rear backplane" on page 227
I
For a complete cabling overview, please refer to section
4x 2.5-inch SAS HDD/SSD rear" on page 571
or
inch PCIe SSD rear" on page 571
.
Connecting cables from 4x 2.5-inch SAS HDD/SSD backplane rear to the
SAS controller
Figure 135: Connecting cables to SAS controller
Ê
Connect the power cable from backplane connector X10 (2) to system board
connector PWR 12V 4.
Ê
Connect the SAS cable to the backplane:
Connector on SAS controller
Connector on backplane
MLC1
X5
Summary of Contents for PRIMERGY RX2540 M2
