RX2540 M2
Upgrade and Maintenance Manual
257
Expansion cards and backup units
Figure 161: Installing the expansion card
Ê
Carefully insert the expansion card into the desired PCI slot and press down
firmly until it is fully seated in the slot.
Ê
Fasten the expansion card with the screw (see circle).
Ê
If applicable, install SFP+ transceiver modules into the new expansion card,
as described in section
"Installing SFP+ transceiver modules" on page 249
Ê
If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
.
Ê
If applicable, connect an FBU cable to the expansion card as described in
section
"Connecting the FBU to the RAID controller" on page 318
.
8.4.1.4
Concluding steps
Ê
Ê
If applicable, connect all external cables to the expansion card(s).
Ê
"Connecting the power cord" on page 79
Ê
Summary of Contents for PRIMERGY RX2540 M2
