268
Upgrade and Maintenance Manual
RX2540 M2
Expansion cards and backup units
8.5.1.5
Removing the rear air grid riser module 1
Figure 168: Removing the rear air grid
Ê
Remove three screws (see circles).
Ê
Remove the rear air grid.
V
CAUTION!
Keep the rear air grid for future use.
Always replace rear air grids into unused installation locations to
comply with applicable EMC regulations and satisfy cooling
requirements.
8.5.1.6
Concluding steps
Ê
Install the riser module 1 as described in section
Ê
Ê
Connect all external cables to the expansion card(s).
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
If applicable,
"Updating RAID controller firmware" on page 106
.
Ê
If applicable,
"Enabling Option ROM scan" on page 107
Ê
"Enabling SVOM boot watchdog functionality" on page 114
Ê
Summary of Contents for PRIMERGY RX2540 M2
