274
Upgrade and Maintenance Manual
RX2540 M2
Expansion cards and backup units
Ê
Ê
Connect all external cables to the expansion card(s).
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
If applicable,
"Updating RAID controller firmware" on page 106
.
Ê
If applicable,
"Enabling Option ROM scan" on page 107
Ê
"Enabling SVOM boot watchdog functionality" on page 114
Ê
"Resuming BitLocker functionality" on page 120
8.5.4
Removing an expansion card from riser module 2
8.5.4.1
Preliminary steps
Ê
If applicable,
"Locating the defective server" on page 61
Ê
"Suspending BitLocker functionality" on page 95
Ê
"Shutting down the server" on page 65
Ê
Remove all external cables from the expansion card to be removed.
I
If there is a cable installed to an expansion card in the upper slot, see
section
"Note for installation with expansion cards in slot 5 and slot
.
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
If applicable, disconnect internal cables from the expansion cards.
Ê
If applicable,
"Removing an SFP+ transceiver module" on page 252
.
Ê
Remove the riser module 2 as described in section
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools:
Phillips PZ2 / (+) No. 2 screw driver / nut driver 5 mm
Summary of Contents for PRIMERGY RX2540 M2
