RX2540 M2
Upgrade and Maintenance Manual
279
Expansion cards and backup units
8.5.5.6
Concluding steps
Ê
Ê
Connect all external cables to the replaced expansion card.
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Enabling replaced components in the system BIOS" on page 115
Ê
If applicable, inform the customer about changed WWN and MAC
addresses. For further information, refer to section
MAC / WWN addresses" on page 122
Ê
If applicable,
"Updating RAID controller firmware" on page 106
Ê
"Enabling SVOM boot watchdog functionality" on page 114
Ê
"Resuming BitLocker functionality" on page 120
8.5.6
Replacing a riser card
8.5.6.1
Preliminary steps
Ê
"Suspending BitLocker functionality" on page 95
Ê
"Disabling SVOM boot watchdog functionality" on page 96
Ê
"Locating the defective server" on page 61
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
Remove all external cables from the expansion card to be replaced.
Ê
"Getting access to the component" on page 68
Ê
If applicable, disconnect internal cables to the expansion card.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools:
Phillips PZ2 / (+) No. 2 screw driver / nut driver 5 mm
Summary of Contents for PRIMERGY RX2540 M2
