RX2540 M2
Upgrade and Maintenance Manual
545
System board and components
14.6.3.3 Concluding steps
Ê
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
14.7 System board
14.7.1 Replacing the system board
Field Replaceable Unit
(FRU)
Hardware: 50 minutes
Software: 10 minutes
Tools:
Replacing the system board:
– Phillips PH2 / (+) No. 2 screw driver / nut driver 5 mm
– Magnifying glass for inspecting CPU socket springs
(recommended)
Replacing the TPM:
– Bit screw driver
– TPM bit insert
(
*
)
– thin slotted screw driver (2 x 0.4 mm)
(
*
)
(
*
)
For the Japanese market:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
If a UFM is installed:
– Phillips PH1 / (+) No. 1 screw driver
If a DynamicLoM module is installed:
– Phillips PH0 / (+) No. 0 screw driver
– hexagon nut driver 5 mm
Summary of Contents for PRIMERGY RX2540 M2
