548
Upgrade and Maintenance Manual
RX2540 M2
System board and components
I
Before removing the expansion cards, take a note on the installation
slot number for each card. Make sure that you reinstall the card in the
slot it was located before the replacement.
Ê
Remove the DynamicLoM module (if applicable), see section
DynamicLoM module" on page 337
or the three screws that are installed in
place of the LoM module.
Ê
Remove the UFM (if applicable), see section
.
I
Remove the UFM spacer from the defective system board and fasten
it to the UFM board with the UFM screw.
Ê
Remove the SATA DOM (if applicable), see section
.
Ê
Remove the iRMC microSD card (if applicable), see section
Summary of Contents for PRIMERGY RX2540 M2
