RX2540 M2
Upgrade and Maintenance Manual
551
System board and components
Figure 414: Removing the system board
Ê
Slightly lift up the system board by the memory module ejectors and a PCI
slot in order to detach it from the centering bolts (C).
Ê
Carefully shift the system board towards the server front until the plug shells
disengage from the cut-outs in the connector panel.
Ê
Hold the defective system board by the memory module ejectors and a PCI
slot and at a slight angle lift it out of the chassis.
Ê
"Removing the TPM" on page 532
Ê
Remove the UFM spacer from the system board.
Summary of Contents for PRIMERGY RX2540 M2
