554
Upgrade and Maintenance Manual
RX2540 M2
System board and components
Figure 417: Installing the stabilizer bar
Ê
Insert the stabilizer bar.
Ê
Fasten the stabilizer bar with the 5 screws.
Ê
Verify the settings on the new system board (see figure
).
Swapping CPUs
Ê
"Opening the load plate" on page 364
Ê
Carefully remove the CPUs from their sockets on the defective system board
as described in
V
CAUTION!
Remove and reinstall one CPU at a time. Do not remove the second
CPU from the defective system board until the first CPU has been
installed on the new system board.
Ê
"Installing the CPU" on page 363
I
Since the defective system board is sent back for repair, protect the
delicate CPU socket springs with a socket cover.
Summary of Contents for PRIMERGY RX2540 M2
