RX2540 M2
Upgrade and Maintenance Manual
555
System board and components
Ê
"Opening the load plate" on page 364
14.7.1.4 Concluding steps
Ê
Reconnect all cables to the system board. For a complete cabling overview,
please refer to section
"List of used cables" on page 559
Ê
Reinstall all remaining system board components as shown in the related
sections:
– Heat sinks: see section
"Installing CPU heat sinks" on page 383
.
– Memory modules: see section
"Installing a memory module" on
.
I
Install all memory modules into their original slots.
– Expansion cards: see section
"Installing expansion cards" on page 255
.
I
Install all expansion cards into their original slots.
– UFM(if applicable): see section
"Installing the UFM" on page 517
– TPM (if applicable): see section
"Installing the TPM" on page 526
.
– DynamicLoM module (if applicable) see section
DynamicLoM module" on page 333
or the three screws that are installed
in place of the DynamicLoM module.
– SATA DOM (if applicable): see section
.
– iRMC microSD card (if applicable): see section
.
Ê
"Installing the fan box" on page 399
Ê
Ê
Install the PSUs, see section
"Installing a hot-plug PSU" on page 134
.
Ê
"Connecting the power cord" on page 79
Ê
Connect all external cables.
Ê
Summary of Contents for PRIMERGY RX2540 M2
