manualshive.com logo in svg

Fujitsu Primergy RX300 S3, User Manual

The Fujitsu Primergy RX300 S3 is a powerful and reliable server designed for seamless business operations. To ensure smooth utilization, it is essential to have the Operating Manual. Download the comprehensive and user-friendly manual for free from 88.208.23.73:8080 to maximize the potential of this superior product.

Share
Download
background image

311

PRIMERGY RX300 S3 User’s Guide

OS installation

Installation method  . . . . . . . . . . . . . . . .  46
Precautions . . . . . . . . . . . . . . . . . . . . . .  47
Preparation . . . . . . . . . . . . . . . . . . . . . .  41

OS installation wizard

Expert mode . . . . . . . . . . . . . . . . . . . . .  84
Guided mode  . . . . . . . . . . . . . . . . . . . .  65

P

Paging File Setting . . . . . . . . . . . . . . . . . .  136

Windows Server 2003 . . . . . . . . . . . . .  139
Windows 2000 Server . . . . . . . . . . . . .  143

Password

Administrator Password  . . . . . . . . . . .  279
Deleting / Changing. . . . . . . . . . . . . . .  280
Setting. . . . . . . . . . . . . . . . . . . . . . . . .  279
Types  . . . . . . . . . . . . . . . . . . . . . . . . .  279
User password  . . . . . . . . . . . . . . . . . .  279

PCI Configuration Submenu . . . . . . . . . . .  238
PCI IRQ Configuration Submenu  . . . . . . .  239
PCI slot . . . . . . . . . . . . . . . . . . . . .  24, 26, 196
PCI SLOTS Configuration Submenu. . . . .  239
Peripheral Configuration Submenu . . . . . .  236
PHP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  197
POST . . . . . . . . . . . . . . . . . . . . . . . . .  32, 260

Error Messages. . . . . . . . . . . . . . . . . .  260

Power

Turning off . . . . . . . . . . . . . . . . . . . . . . .  33
Turning on. . . . . . . . . . . . . . . . . . . . . . .  32

Power LED . . . . . . . . . . . . . . . . . . . . . . . . .  22
Power On/Off Submenu . . . . . . . . . . . . . .  242
Power supply monitoring. . . . . . . . . . . . . .  176
Power Supply Unit  . . . . . . . . . . . . . . . . . . .  26
Power supply unit . . . . . . . . . . . .  24, 180, 221

Installing . . . . . . . . . . . . . . . . . . . . . . .  221
Removing . . . . . . . . . . . . . . . . . . . . . .  222
Replacing during the Redundant Operation . .  223

Power switch. . . . . . . . . . . . . . . . . . . . . . . .  22

Operation mode  . . . . . . . . . . . . . . . . . .  34

Preconfiguration mode . . . . . . . . . . . . . . . .  74

R

Rack key. . . . . . . . . . . . . . . . . . . . . . .  29, 278
RAID configuration

Notes  . . . . . . . . . . . . . . . . . . . . . . . . . .  47

RAID error monitoring . . . . . . . . . . . . . . . .  175
RAID Management Tool . . . . . . . . . . .  20, 174

Installation. . . . . . . . . . . . . . . . . . . . . .  174

RAID wizard . . . . . . . . . . . . . . . . . . . . . . . .  61
Rear maintenance LED / System identification LED  .  25
Redundant power feature . . . . . . . . . . . . .  221
Remote Installation . . . . . . . . . . . . . . . .  19, 88

Configuring a remote floppy  . . . . . . . .  102
Failure. . . . . . . . . . . . . . . . . . . . . . . . .  271

Preparation of remote resources . . . . . . .98
Preparation of the PXE server. . . . . . . . .91
PXE server requirements  . . . . . . . . . . . .89
Remote resource server requirements  . .89
Starting installation (for a PXE server). . .99
Starting installation (for a remote resource 

server) . . . . . . . . . . . . . . . . . . . . . . .102

Required Driver Disks. . . . . . . . . . . . . . . . .112
Reset switch . . . . . . . . . . . . . . . . . . . . . . . . .23
Restoring the system

Windows Server 2003. . . . . . . . . . . . . .285
Windows 2000 Server. . . . . . . . . . . . . .286

Riser card . . . . . . . . . . . . . . . . . . . . . . . . . .202

S

Saving the system event log . . . . . . . . . . . .277
SCSI array controller card. . . . . . . . . . . . . .198
SCSI Cable. . . . . . . . . . . . . . . . . . . . . . . . .225
SDRR Browser Submenu . . . . . . . . . . . . . .243
Security  . . . . . . . . . . . . . . . . . . . . . . . . . . .278

Server disposal . . . . . . . . . . . . . . . . . . .281
Software . . . . . . . . . . . . . . . . . . . . . . . .279
Unauthorized Use . . . . . . . . . . . . . . . . .279

Security Menu. . . . . . . . . . . . . . . . . . . . . . .245
Server

Cleaning . . . . . . . . . . . . . . . . . . . . . . . .255
Front View. . . . . . . . . . . . . . . . . . . . . . . .22
Internal . . . . . . . . . . . . . . . . . . . . . . . . . .26
Rear View . . . . . . . . . . . . . . . . . . . . . . . .24

Server disposal. . . . . . . . . . . . . . . . . . . . . .281
Server Management Tools . . . . . . . . . . . . .148

Cautions . . . . . . . . . . . . . . . . . . . . . . . .148
Error Messages  . . . . . . . . . . . . . . . . . .264
Exiting. . . . . . . . . . . . . . . . . . . . . . . . . .275
Starting . . . . . . . . . . . . . . . . . . . . . . . . .274

Server Menu. . . . . . . . . . . . . . . . . . . . . . . .246
Server Monitoring Tool . . . . . . . . . . . . .20, 175

Installation. . . . . . . . . . . . . . . . . . . . . . .176

ServerStart . . . . . . . . . . . . . . . . . . . . . . . . . .16

Cautions . . . . . . . . . . . . . . . . . . . . . . . . .48
Installation. . . . . . . . . . . . . . . . . . . . . . . .51
Supported expansion cards. . . . . . . . . . .50
Uninstallation  . . . . . . . . . . . . . . . . . . . . .54

ServerView . . . . . . . . . . . . . . . . . .20, 175, 254

Installation. . . . . . . . . . . . . . . . . . . . . . .176

SNMP service. . . . . . . . . . . . . . . . . . . . . . .272
Software Troubleshooting . . . . . . . . . . . . . .266
Solving problems  . . . . . . . . . . . . . . . . . . . .177
System Diagnosis Support Tool  . . . . . . . . . .20
System Event Log  . . . . . . . . . . . . . . . . . . .274
System Event Log Submenu  . . . . . . . . . . .243
System fan . . . . . . . . . . . . . . . . . . . . . . . . . .26
System identification LED button  . . . . . . . . .22
System Recovery Disk . . . . . . . . . . . . . . . .146

Summary of Contents for Primergy RX300 S3


























































































































































































































































































































Reviews:

No comments

Related manuals for Primergy RX300 S3

Basalte CORE PLUS Installation Manual preview
CORE PLUS
Brand: Basalte Pages: 2
Vicon VALERUS SERIES Quick Start User Manual preview
VALERUS SERIES
Brand: Vicon Pages: 2
B&B ES1AWB Instruction Manual preview
ES1AWB
Brand: B&B Pages: 55
NEC EXP339 User Manual preview
EXP339
Brand: NEC Pages: 128
Digital Equipment Server 3100 series Installation Manual preview
Server 3100 series
Brand: Digital Equipment Pages: 71
Supermicro SUPERSERVER 5019S-M User Manual preview
SUPERSERVER 5019S-M
Brand: Supermicro Pages: 65
Blackberry ENTERPRISE SERVER FOR NOVELL GROUPWISE Installation And Configuration Manual preview
ENTERPRISE SERVER FOR NOVELL GROUPWISE
Brand: Blackberry Pages: 73
IBM eServer xSeries 205 Type 8480 Hardware Maintenance Manual And Troubleshooting Manual preview
eServer xSeries 205 Type 8480
Brand: IBM Pages: 168
Magnimage LED-F816-3D User Manual preview
LED-F816-3D
Brand: Magnimage Pages: 42
Canon imagePRESS Server G200 Configuration And Setup preview
imagePRESS Server G200
Brand: Canon Pages: 98
Canon imagePRESS A3200 Installation And Service Manual preview
imagePRESS A3200
Brand: Canon Pages: 192
Canon ColorPass-Z7400 Configuration Manual preview
ColorPass-Z7400
Brand: Canon Pages: 210
DataCard 500 Datasheet preview
500
Brand: DataCard Pages: 2
Overland Storage SnapServer Expansion E2000 Quick Start Manual preview
SnapServer Expansion E2000
Brand: Overland Storage Pages: 5
Overland Storage SnapSAN S3000 User Manual preview
SnapSAN S3000
Brand: Overland Storage Pages: 133
EVS XSnano Configuration Manual preview
XSnano
Brand: EVS Pages: 198
IBM 1-Port Hardware User'S Manual preview
1-Port
Brand: IBM Pages: 15
Multitech TalkAnytime TA2410 User Manual preview
TalkAnytime TA2410
Brand: Multitech Pages: 235

Brands by name

Popular brands

Load more brands